is the 13 accord the same as the 12?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132439
Printed Date: May 09, 2024 at 8:36 PM
Topic: is the 13 accord the same as the 12?
Posted By: chev104275
Subject: is the 13 accord the same as the 12?
Date Posted: October 20, 2012 at 6:37 AM
As the title states. Does anyone know if the 13 accord is the same as the 12. I have one to do in there driveway and tribg to avoid a surprise I was going to use an idata ink ALCA module but they only list up to a 12
Thanks Joe
-------------
If i Can't Install it I Don't need it Joe
Replies:
Posted By: flobee4
Date Posted: October 20, 2012 at 8:15 AM
Its different according to directechs. No bpass yet, you'll have to use a 556u
ignition wires look pretty standard.
parking lights is (-)gray at the headlight switch.
Brake is lt. Green at the brake pedal.
Trunk is orange(5-wire) listed at the fusebox, but you might find it in the running board.
lock is (-) green, pink for unlock in the drivers kick, 25 pin white plug. pins 24 and 25. Drivers kick in door harness
arm is a purple wire and a blue wire pulsed at the same time, 25 pin white plug-pins 19 & 22. Drivers kick in door harness
Disarm is a red wire and light blue pulsed at the same time. located at 25 pin white plug-pins 18 & 23. Drivers kick in door harness
I haven't done one myself, but thats what listed in directechs.
Posted By: Mike M2
Date Posted: October 20, 2012 at 1:54 PM
The Idatalink bypass will NOT work on the 2013 Accord. As of now there are no bypass solutions in the market made by anyone for this car.
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: chev104275
Date Posted: October 20, 2012 at 3:43 PM
Thanks guys ill tell him to wait rather than give up a key
-------------
If i Can't Install it I Don't need it Joe
Posted By: offroadzj
Date Posted: December 16, 2012 at 10:46 PM
I just looked into it for one of my customers and idatalink still does not have anything listed, but Fortin shows firmware for the EVO-ALL for the 2013 Accord with Push button start. According to their site, they only list the PTS for the 2013 Accord. However, it still requires giving up a key and using the Fortin INSET membrane inside the key... so not much different other than providing convenience features (locks, alarm, hood pin, door pin, trunk pin, etc)
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: chev104275
Date Posted: December 17, 2012 at 8:15 AM
Thanks Kenny. I told him and he would rather wait for a no key bypass thanks for the info though
-------------
If i Can't Install it I Don't need it Joe
Posted By: offroadzj
Date Posted: December 17, 2012 at 8:50 AM
Yea, that's pretty much what I just told my customer as well. I'm hoping that Fortin's bypass (key required) was just a quick solution to get the firmware out and that they will have a keyless option soon. I also sent a message into iDatalink to see if they are making any progress. I'll let you know what I find out.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: auto enhancers
Date Posted: December 17, 2012 at 10:58 PM
offroadzj wrote:
I also sent a message into iDatalink to see if they are making any progress. I'll let you know what I find out.
Why???? Do you think that they are holding this info back. They know that people are looking for this solution and will get it to us just as soon as they can. Having people ask when they are going to release it dosent speed anything up.
Posted By: offroadzj
Date Posted: December 18, 2012 at 8:16 AM
No, but I like to be able to give my customers at least a general idea. So I like to know if its a high priority vehicle or if it's on the back burner so to say. I assumed it would be a high priority vehicle, but I like to make sure. I could be wrong, but I doubt the people that are running the website / facebook / information pages are not the same people developing the firmware... so it's not like we are slowing them down on the development.
Plus you never know if the firmware is already developed and they are just waiting to get it online...
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: offroadzj
Date Posted: December 18, 2012 at 8:20 AM
No, but I like to be able to give my customers at least a general idea. So I like to know if its a high priority vehicle or if it's on the back burner so to say. I assumed it would be a high priority vehicle, but I like to make sure. I could be wrong, but I doubt the people that are running the website / facebook / information pages are not the same people developing the firmware... so it's not like we are slowing them down on the development.
Plus you never know if the firmware is already developed and they are just waiting to get it online...
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: corlon
Date Posted: December 18, 2012 at 2:06 PM
i hear the key / fob is 128 bit. so maybe their having a tough time cracking it!
-------------
nice...
Posted By: corlon
Date Posted: December 18, 2012 at 2:11 PM
just looked up the fortin piece. looks like it only works for the automatic transmssion.
-------------
nice...
|