viper 4704 remote start programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132493
Printed Date: May 10, 2025 at 9:44 AM

Topic: viper 4704 remote start programming

Posted By: perfecthrasher
Subject: viper 4704 remote start programming
Date Posted: October 26, 2012 at 2:39 PM

I'm attempting to program a Viper 4704, after changing an option and exiting programming I get one short then one long chirp and the change(s) are not saved. I've searched the net and have not found what the first short chirp means.

btw the door sense is connected and works.

ty

Replies:

Posted By: shortcircuit161
Date Posted: October 26, 2012 at 3:43 PM

This sounds like what may be happening to you. Possibly where you bought it from locked it.

The learn routine may be locked if previously programmed using the Bitwriter®.
If the horn generates one long honk when attempting to program the unit, the learn routine is locked and must be unlocked using the Bitwriter®
before proceeding.

-------------

Print Page | Close Window