subaru wrx 07 factory alarm removal

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132503
Printed Date: May 01, 2025 at 4:09 PM

Topic: subaru wrx 07 factory alarm removal

Posted By: benelectrical
Subject: subaru wrx 07 factory alarm removal
Date Posted: October 28, 2012 at 1:03 AM

Hey guys, im just looking if possiable for a write up on removing a factory Brant Alarm system

like what wires to disconnect to make the system inop and have no issues with ecu and starting

thanks in advance

-------------

Replies:

Posted By: howie ll
Date Posted: October 28, 2012 at 1:30 AM

Have you tried asking an auto electrician?
First you will have to Google the brand, I doubt anyone here or the US has heard of it.
Second if it was a real "integrated" into the vehicle alarm you wouldn't even be asking this question, you would have already plugged in the diagnostics.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: benelectrical
Date Posted: October 28, 2012 at 1:33 AM

from what iv heared its only three wires to disconnect

not the kind of system u can turn off with diagnostics ( OBD2 Plugin)

-------------

Posted By: kreg357
Date Posted: October 28, 2012 at 8:14 PM

The Subaru Factory Alarm systems can be "disabled" in U.S. market vehicles. There are instructions in the Owners Manual.

Here is a link : https://techinfo.subaru.com/proxy/69501/pdf/ownerManual/069501_2007_ImprezaWRXSTi/MSA5M0701A_9.pdf

See Page 2-13. Not sure if it is the same for cars "down under".

-------------
Soldering is fun!

Print Page | Close Window