clifford g4 solaris
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132555
Printed Date: May 20, 2024 at 11:17 AM
Topic: clifford g4 solaris
Posted By: pimentel
Subject: clifford g4 solaris
Date Posted: November 02, 2012 at 4:57 PM
Hi everyone,this is my first post.Ok i am installing a Clifford g4 Solaris in my 2004 Susuki Aerio.
#1 there is a rpm input wire from the 24pin BLACK/ gray i need to know if i connect this wire to the wire on the fuel injector.
Replies:
Posted By: howie ll
Date Posted: November 02, 2012 at 7:14 PM
Yes you will have 8 wires on the 4 injectors (assuming a 4 cylinder engine) ignore the 4 wires that will be the same colour, connect to any other.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: pimentel
Date Posted: November 02, 2012 at 7:35 PM
Thank you for your reply,Howie for now I just want to get this unit (remote starter) installed to start my car with out connecting the door locks/ hood pi n/parking lights/any other wire,oh ya can you tell me if I need to install a relay for the 2nd ignition wire on the cars harness, I will be installing this unit tonight.
Thanks for your time
Posted By: howie ll
Date Posted: November 02, 2012 at 7:55 PM
Read the wiring guide you have a 2nd. ignition wire built in, GREY.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|