Print Page | Close Window

Security Lght

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13259
Printed Date: November 05, 2025 at 6:15 PM


Topic: Security Lght

Posted By: Malibu2882
Subject: Security Lght
Date Posted: May 07, 2003 at 1:06 AM

I would like for the dash's "security" light to flash when the alarm is armed. I'm sure I'll have to tap in to the wire the goes in to the cluster but I'm not sure. Has anyone done this before? I already have an LEDon the dash.Any pointers? thanks!

Dave

99 chevrolet malibu



-------------
Dave



Replies:

Posted By: special137
Date Posted: May 07, 2003 at 6:52 AM
You would need to ditch the LED or tap the wires to it and relay it to the security lamp. You'll have to find out which wire from the instrument cluster feeds the security light and tap this.  Use a 1 amp diode to isolate the feed from the relay to the to the security light.  That should do it for you!!


Print Page | Close Window