Print Page | Close Window

to ground or not to ground

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1326
Printed Date: July 20, 2025 at 11:48 PM


Topic: to ground or not to ground

Posted By: dyer
Subject: to ground or not to ground
Date Posted: June 15, 2002 at 7:48 AM

my car does not have a hood pin, so should i ground the wire that is supposed to run to it or should i just not connect it anywjere?

-------------
Dyer



Replies:

Posted By: Velocity Motors
Date Posted: June 15, 2002 at 8:17 AM

Go and buy a hood pin switch for $ 0.99 and hook up the hood pi switch. The hood pin switch is a vital part of the system that will protect the hood area and also protect anyone who is working on the car from accidental starts if a remote starter is installed. Wire up the unit properly with all connection going where they are supposed to go and you'll find that you will have less troubles in the future when you have to triuble shoot for problems.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: dyer
Date Posted: June 15, 2002 at 8:55 AM
thanks

-------------
Dyer




Print Page | Close Window