Print Page | Close Window

Crimestopper Cool Start ignition output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13264
Printed Date: May 29, 2024 at 6:49 AM


Topic: Crimestopper Cool Start ignition output

Posted By: The Wood
Subject: Crimestopper Cool Start ignition output
Date Posted: May 07, 2003 at 7:33 AM

I have a 96 Chevrolet Cavalier.  I'm trying to install the ignition output or Anti-grind/starter disable output.  When I tapped into the wires, the anti-theft kicked in and didn't allow me to start the car.  I pulled the fuse and let it reset then reinstalled the fuse.  The car started after that (with the key).  How do I get around the anti-theft.  The installation manual says something about an "Anti-Theft/Transponder Module.  Do I need this or is there another way??  How do I install the ignitoin output to the alarm?

-------------



Replies:

Posted By: chuckles
Date Posted: May 07, 2003 at 10:04 AM
Yes you do need the transponder. Crimestoppers has them, so go back, tell what you have and get the right one for your make.   Chuckles


Print Page | Close Window