crimestopper sp 101
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132662
Printed Date: May 10, 2025 at 4:36 AM
Topic: crimestopper sp 101
Posted By: ks audio
Subject: crimestopper sp 101
Date Posted: November 13, 2012 at 7:02 PM
I installed this alarm on a 98 Toyota Tacoma pickup. when the alarm is armed it will go off 30 sec. later if I push the silent button it will go off 60 sec. later. I went through and made sure every thing is wired up right. I went back through and looked at wiring diagrams and there is not much to this alarm. does any one have any ideas. Thanks.
-------------
ksaudio
Replies:
Posted By: ks audio
Date Posted: November 14, 2012 at 5:30 PM
Ok I found out that I had to replace the sensor and reprogram the remotes. I aslo found out that if I press the arm button once and wait 30 it will go off like some one hit it. but if I push the lock button two time it will cherp 3 time and be armed.
-------------
ksaudio
Posted By: lucasoil4u
Date Posted: November 15, 2012 at 2:00 PM
cause when you push the button twice you are bypassing a channel. Figure out what channel it is bypassing and that is your problem.
Posted By: ks audio
Date Posted: November 15, 2012 at 2:27 PM
thanks for replying but I am not sure what you are tring to say. about channels. I talk to crimstopper and they think something is wrong with the brain. but I am not sure I have never had this problem before.
-------------
ksaudio
|