00 jeep grand cherokee out of range error

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132686
Printed Date: May 03, 2024 at 4:41 PM

Topic: 00 jeep grand cherokee out of range error

Posted By: greeky510
Subject: 00 jeep grand cherokee out of range error
Date Posted: November 16, 2012 at 12:50 PM

I installed a Viper 5704 on my 00 Jeep Grand Cherokee. Everything works fine except when i remote start the car the remote will not work. It gives out of range error on all functions. This is the 3rd one i install and its the first time this happens. Any ideas? Thank you much.

Replies:

Posted By: greeky510
Date Posted: November 16, 2012 at 1:01 PM

I used the DB-ALL bypass module in the D2D configuration

Posted By: lurch228
Date Posted: November 16, 2012 at 9:09 PM

Most common cause is a poor ground, check and make sure that you getting good metal to metal contact.

Print Page | Close Window