2003 accord ignition
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132723
Printed Date: April 27, 2024 at 2:40 AM
Topic: 2003 accord ignition
Posted By: maxcat
Subject: 2003 accord ignition
Date Posted: November 19, 2012 at 9:47 PM
hey Guys,looking for suggestions, just got a call from a customer which about a year ago I installed a compustar 6200 with a Fortin EVO ALL bypass module. He has a 2003 honda accord and recently replaced the battery in the accord. Now upon remote start the vehicle will crank but will not start.Had him look for the security light to come on during remote start, but it does not. Then had him place a key in the ignition and try to start but got the same result. Wondering if the Evo all has to be relearnt, as I am using data link mode.Or maybe the ignition wire is not getting 12 volts on start.
Any ideas or insight would be appreciated.
Thank you in advance
Replies:
Posted By: auto enhancers
Date Posted: November 19, 2012 at 10:22 PM
Loss of tach reference. Maybe.
Posted By: maxcat
Date Posted: November 19, 2012 at 10:58 PM
yeah, the tach if I remember is done through the evo all. but I will certainly relearn the tach when I get the vehicle.
Thanks so much for the reply
|