Print Page | Close Window

2002 dodge ram dlpkgm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132822
Printed Date: May 08, 2025 at 7:41 PM


Topic: 2002 dodge ram dlpkgm

Posted By: lucasoil4u
Subject: 2002 dodge ram dlpkgm
Date Posted: November 29, 2012 at 5:21 PM

In the instructions for a DLPKGM it says to hit lock to put into d2d mode. If I wire up w2w do i need to hook up all the wires cause it only controls transponder bypass on this truck. Locks will be done with the remote start. Thanks



Replies:

Posted By: shortcircuit161
Date Posted: November 29, 2012 at 6:05 PM
Looking at the install diagram, the DLPKGM will only control immobilizer bypass, therefore you wouldn't need to connect to the lock wires of it.

In W2W, you will still need to connect at least the pink Ign input wire, Blue/white status wire, Purple Data wire, pink/black and pink/white.

Everything else you can go direct from the RS to the Ram.


-------------





Print Page | Close Window