i need 2007 nissan murano bcm diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132850
Printed Date: May 09, 2024 at 4:44 PM

Topic: i need 2007 nissan murano bcm diagram

Posted By: sucks37123
Subject: i need 2007 nissan murano bcm diagram
Date Posted: December 01, 2012 at 6:01 PM

I am installing a viper 771 alarm remote start

unit. I need a diagram of the bcm for my 2007 nissan murano s I am looking for the right front door triger wire I know it is red, but there are 4 red wires. Also what is the easiest way to bring the constant power wire from the battery inside to the alarm unit?

Replies:

Posted By: Mike M2
Date Posted: December 01, 2012 at 6:35 PM

The easiest way to get power from the battery is to not go to the battery. Use the fat green wire on the ignition switch as battery. The rightside door pin is red or RED / green, white 40 pin plug, pin 12.

It is much easier to use the all door trigger, which is red on the black 15 pin plug, pin 8 for door trigger. It will have a delay...

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: KPierson
Date Posted: December 01, 2012 at 9:00 PM

www.nicoclub.com/FSM

-------------
Kevin Pierson

Posted By: Ween
Date Posted: December 01, 2012 at 9:05 PM

those that do frequent work on nissan products would be wise to bookmark that link... thanks for the reminder KP

Posted By: sucks37123
Date Posted: December 02, 2012 at 12:24 PM

How about runng the Tachometer Wire?

Posted By: Mike M2
Date Posted: December 02, 2012 at 1:54 PM

What are you using for immobilizer bypass? Most have a tach wire included in the data.

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: sucks37123
Date Posted: December 02, 2012 at 2:10 PM

< size=7 face=Futura-CondensedExtraBold>< size=7 face=Futura-CondensedExtraBold>
DEi 556U Immobilizer Interface

Posted By: sucks37123
Date Posted: December 02, 2012 at 3:55 PM

Mike thanks for the pin number do you know if i can tie into the brake lights from the bcm as well?

Posted By: sucks37123
Date Posted: December 02, 2012 at 4:02 PM

Does anyone know if I have to hook up the key sence wire and if so where is it located?

Posted By: sucks37123
Date Posted: December 02, 2012 at 9:25 PM

Parking lights not brake lights sorry.