4113 with existing am1

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132982
Printed Date: May 03, 2025 at 11:03 PM

Topic: 4113 with existing am1

Posted By: sean11901
Subject: 4113 with existing am1
Date Posted: December 15, 2012 at 7:35 AM

hi i am installing an avital 4113 in a vehicle with an AM1 automate. how would i go about disarming the am1 when the remote start initiates?

i was assuming that i would have to hook up the lt GREEN/ black from the 4113 to the AM1's disarm input correct?

this is in a 2011 accord
and I'm using the latest pk09 firmware for this install.

Replies:

Posted By: sean11901
Date Posted: December 15, 2012 at 8:29 AM

please anyone have any input on this?

Posted By: sean11901
Date Posted: December 15, 2012 at 8:44 AM

disregard. I've resolved it

Print Page | Close Window