Print Page | Close Window

rs on 2006 honda odyssey

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133036
Printed Date: May 07, 2024 at 1:02 AM


Topic: rs on 2006 honda odyssey

Posted By: laziebun
Subject: rs on 2006 honda odyssey
Date Posted: December 20, 2012 at 8:11 PM

Can anyone tell me where the rear defogger wire is at?

Also in reference to the Xpress XK09, if i D2D the unit to the viper 5904, do i need to do anything else for the power side door to work?



Replies:

Posted By: 91stt
Date Posted: December 20, 2012 at 10:25 PM
Rear Defrost BLACK / YELLOW (+) UNDER HOOD FUSE/RELAY BOX

Note:THIS VEHICLE USES DATA TO CARRY THE REAR DEFROST SIGNAL FROM THE A/C CONTROL UNIT TO THE UNDER HOOD FUSE/RELAY BOX, MUST USE RELAY AND FUSE AT 30 AMPS

-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.




Posted By: laziebun
Date Posted: December 21, 2012 at 7:35 AM
could someone explain "uses data...." part to me?




Posted By: 91stt
Date Posted: December 21, 2012 at 9:27 AM
data means that there is no analog way of controlling that particular feature, such as, supplying +12vdc, ground, or the use of resistors to +12vdc or ground, etc. I looked at the popular interfaces and none seem to be able to active the rear defrost feature. The only analog method requires you to pick the wire at the fuse box in the engine compartment.
I do not install DEI products but if the 5904 have auxiliary 1 & 2 channels, it should work. The 5904 may refer to them as different numbers depending on convention they are using, you will need to test the function to determine the proper channel.

-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.





Print Page | Close Window