2008 elantra locks while running
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133086
Printed Date: May 17, 2024 at 10:35 PM
Topic: 2008 elantra locks while running
Posted By: offroadzj
Subject: 2008 elantra locks while running
Date Posted: December 26, 2012 at 8:29 AM
I just did a 2008 Elantra the other day and the customer did not care about the factory alarm so I just connected the normal lock / unlock wires. However, he says that when it is remote started, the locks are not working. I did notice while testing that if I locked with the factory remote then remote started it, the locks would not function, but if I locked with the Compustar remote, the locks worked fine while running. But now I'm wondering if maybe that was just a coincidence. Anyone ever run into this? I'm thinking I may just wire up the arm / disarm and see if that fixes it, but I wanted to check before dealing with PITA arm / disarm relay setup.
Thanks
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Replies:
Posted By: cmk0808ny
Date Posted: December 26, 2012 at 9:03 AM
On Hyundais you need to unlock with factory remote and the compustar will work during rs. Tell them to unlock it and leave the remote in a drawer.
|