valet 561t using viper 900 needed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133091
Printed Date: July 26, 2025 at 6:21 PM

Topic: valet 561t using viper 900 needed

Posted By: wirx
Subject: valet 561t using viper 900 needed
Date Posted: December 26, 2012 at 5:06 PM

I want to hook up a DEI Valet 561t RS to a Viper 900 Alarm in a 05 Subaru WRX. I only want to use the RS function of the 561t do I still need to hook up lock in/outputs? Im looking for the minimum wires to hook up.

Thanks

Stephen

Replies:

Posted By: wirx
Date Posted: December 26, 2012 at 5:11 PM

Title should read help needed.

Posted By: wirx
Date Posted: December 27, 2012 at 12:44 AM

Im hoping this will help. This is how everything is currently wired. The car has a Greddy Turbo Timer Harness plugged into the stock harness with a Relay doing something. I imagine it's so the Timer was powered after the key was switched off.

12 PIN Harness

Red --> Red (Turbo Timer Harness) --> (BLK/WHT IGN)
Brown --> Siren
Yellow --> 87a (DPST Relay)
Black --> GRD
Blue --> Yellow/Red (Subaru Keyless Unit)
Green --> Yellow (Subaru Keyless Unit)
BLACK/ White --> Yellow (Subaru Keyless Unit)
White --> Orange Subaru Column Harness

7 PIN Harness

Purple --> GRD
PURPLE / Black --> GRD
Blue/Black --> ORANGE / Black (Subaru Keyless Unit)
GREEN/ Black --> ORANGE / White (Subaru Keyless Unit)
BLACK/ White --> GRD

Main Power

Green --> White (Turbo Timer Harness)
Green --> White (Turbo Timer Harness) (BLACK / YELLOW Subaru IGN)

Relay

87 - Blue (Turbo Timer Harness) (BLACK/ Blue Subaru IGN)
87a - Viper 900 Yellow (12 PIN Harness)
86 - Blue (Turbo Timer Harness) (BLACK/ Blue Subaru IGN)
85 - GRD
30 - Green (Turbo Timer Harness) (Black Subaru IGN)
posted_image

Posted By: wirx
Date Posted: December 27, 2012 at 12:54 AM

Here is what Im looking for:

Valet 561t

Heavy Gauge Relay Wiring

Pink - IGN output
Purple - Starter output
Orange - Output Accessory
Pink/White - Programmable Output

These aren't a problem I'm just confused as to what that relay does exactly and where these should be.

Primary Harness

Light GREEN/ Black (Factory Disarm)
GREEN/ YELLOW (Factory Rearm)
Yellow ( + IGN Out to alarm)
WHITE/ Blue ( - Activation input)
WHITE/ Red (+ Activation input)

4 Pin

Blue ( Status Output)
Orange (Accessory Trigger)
Purple (Starter Trigger)
Pink (Ignition Trigger)

Door Lock Harness (Do I need it)