Print Page | Close Window

dei 20402 bypass module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133095
Printed Date: May 16, 2024 at 12:52 PM


Topic: dei 20402 bypass module

Posted By: voltswagon
Subject: dei 20402 bypass module
Date Posted: December 26, 2012 at 8:29 PM

Has anyone used this module(discontinued) without the key before? Instead use resistance value setting.  If yes, how dependable is it?  I was thinking of using it on 2010 Nissan Rogue.

-------------
Dont Drive and Text, but
Do Text Then Drive



Replies:

Posted By: pentavolvo
Date Posted: December 27, 2012 at 5:04 PM
im pretty sure that wont work you need something to emulate the chip in the key

just get a dlpk they are pretty cheap




Posted By: voltswagon
Date Posted: December 27, 2012 at 5:17 PM

cheap? DLPK is about $45.  With that price, I mind as well get the DBALL or XK09, keyhold loopless or ringless, whatever you call it.

Anyway, I'll try to see if I can try to get the resistance setting, if it doesn't work I could always use the KIB.  This is only $10.



-------------
Dont Drive and Text, but
Do Text Then Drive




Posted By: pentavolvo
Date Posted: December 27, 2012 at 5:21 PM
dlpk is loopless for that car if i recall and will give u the locks. good luck post up how it goes





Print Page | Close Window