96 silverado keyless entry issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133132
Printed Date: July 15, 2025 at 7:54 AM

Topic: 96 silverado keyless entry issues

Posted By: master_beta
Subject: 96 silverado keyless entry issues
Date Posted: December 30, 2012 at 12:39 AM

i am putting a viper 350 plus alarm into a 96 silverado. i need to know how to wire the keyless entry. i have located the wires near the drivers kick pannel. but the alarm doesnt show an optinal wiring diagram for the way they operate. is there a relay somewhere i need to locate or buy? the keyless entry is the reason i bought the alarm, so its anoying that i cant even use it.

Replies:

Posted By: smokeman1
Date Posted: December 30, 2012 at 7:52 AM

https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

Bulldog lists it as a Type A system. Blue (+) from the Viper to Lt. Blue....Green(+) from the Viper to White.

Link to Doc 1041 that explains the different types of lock systems and testing for such: https://www.the12volt.com/installbay/downloads.asp?srch=all&term=1041

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: master_beta
Date Posted: January 03, 2013 at 7:08 PM

It's a type C system I actually tried a bulldog keyless entry and it wouldn't work. It said to cut the white wire cut the light blue wire And connect four wires Unit. But my viper alarm only has two door lock Wires, So how do I run this kind of loop on my alarm or do I need a relay switch?

Print Page | Close Window