cm6000 firware update

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133143
Printed Date: May 11, 2024 at 11:41 AM

Topic: cm6000 firware update

Posted By: Lubrano
Subject: cm6000 firware update
Date Posted: December 31, 2012 at 1:29 PM

I need to update the firemware on a cm6000 to gain some features which will be used. I do not own an op500. Is there any way I can do this rather inexpensilvely, maybe buying a cable to go directly to a pc?

Replies:

Posted By: shortcircuit161
Date Posted: December 31, 2012 at 2:50 PM

You might be able to update and change features on the idatalink website. That would require the use of their programming cable (ADS-USB) and a dealer account (or know someone who does). I know a lot of the newer model Compustars (6200's) can be updated and modified right from their site. Otherwise, you would need the OP-500.

-------------

Posted By: lucasoil4u
Date Posted: January 16, 2013 at 3:11 PM

You can update that way but you will need to insert a blade module to do that.

Print Page | Close Window