Print Page | Close Window

hornet 560t, remote not working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133145
Printed Date: July 17, 2025 at 5:46 PM


Topic: hornet 560t, remote not working

Posted By: 87gbody
Subject: hornet 560t, remote not working
Date Posted: December 31, 2012 at 3:09 PM

I just installed a Hornet 560T in an '04 Jeep Liberty. Are the remote supposed to come pre-programmed? Mine did not work so I tried to program it but that did not work. Parking light were supposed to flash but did not. Everything is brand new.


Also, the (2) Red 12v+ wires..I believe one is constant and one is switched. Does it matter which is which?



Replies:

Posted By: pentavolvo
Date Posted: December 31, 2012 at 3:30 PM
both red 12 volt wires are supposed to be constant



Posted By: 87gbody
Date Posted: December 31, 2012 at 3:50 PM
Can I hook the activation wire(test wire, ground twice in a row to start) to the door locks so the factory FOB can be used to remote start? I.E. hit lock button twice to start car.



Posted By: 87gbody
Date Posted: December 31, 2012 at 4:32 PM
Forgot to mention, it works fine when starting with the activation wire.(ground twice to start)



Posted By: 87gbody
Date Posted: January 01, 2013 at 7:01 PM
Got it working with the door lock circuit and the factory FOB.


Print Page | Close Window