dball + viper 5704 + vsm200, connectioné

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133156
Printed Date: May 20, 2024 at 7:31 PM

Topic: dball + viper 5704 + vsm200, connectioné

Posted By: wup123
Subject: dball + viper 5704 + vsm200, connectioné
Date Posted: January 01, 2013 at 1:34 PM

I was just wondering how to go about connecting this all together. They all have a D2D port, and the 5704 and VSM200 have a bit writer port. Will it work if I hook it up as follows

VSM200----(bit writer)----5704---(D2D)----DBALL

Or is there another way I should be hooking them togetherÉ

Thanks

Replies:

Posted By: shortcircuit161
Date Posted: January 02, 2013 at 11:32 AM

Yes that is the correct way to do it.

You would connect the DBALL using the D2D cord direct to the 5704.

You would connect the VSM200 to the bitwriter port. You would not use any of the other data plugs from the Y-adapater on the VSM200.

-------------

Print Page | Close Window