cm3000 aux output pulse how do i program

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133212
Printed Date: May 21, 2024 at 11:06 AM

Topic: cm3000 aux output pulse how do i program

Posted By: guitar_freak
Subject: cm3000 aux output pulse how do i program
Date Posted: January 06, 2013 at 11:36 PM

So I have solenoids hooked up to my compustar cm3000 and it used to be set to the default "pulsed" option and it some how changed to the constant on. Now it dosnt turn off unless I press the button again. I have the 2w900FMR remote. Is their anyway I can change the auxiliary back to the pulsed option by just using my remote? I don't really want to have to find a dealer to change it back. Maybe their is some way I could just reset the whole brain? Could anyone give me a hand with this?

Replies:

Posted By: kreg357
Date Posted: January 07, 2013 at 4:34 AM

Here is a link to the CM3000 Install guide : https://www.the12volt.com/installbay/file.asp?ID=355

See Page 4 for info on programming with 4 button remotes and Page 5 for the AUX1 and AUX2 options.

-------------
Soldering is fun!

Print Page | Close Window