viper responder one

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133282
Printed Date: July 06, 2025 at 11:50 PM

Topic: viper responder one

Posted By: lucasoil4u
Subject: viper responder one
Date Posted: January 12, 2013 at 4:55 PM

Viper Responder One in a 2011 Mazda 3 . The unit will not allow me to program the unit. No led flashes. No response when using the program button. The remote starter works. The car will not go into pit stop mode correctly. When going into pit stop mode the car shuts off and restarts then runs just fine. Anyone in Mn have a Bitwriter? Any ideas whats up.
Thanks
Ryan

Replies:

Posted By: dasbogie
Date Posted: January 12, 2013 at 5:32 PM

Which bypass are you using and are you running it d2d?

-------------
Advanced

Posted By: lucasoil4u
Date Posted: January 12, 2013 at 5:48 PM

Pkall and Yes. But It did the same thing when i had it hardwired.

Posted By: lucasoil4u
Date Posted: January 14, 2013 at 8:11 AM

Any ideas?

Print Page | Close Window