avital 5103 in 97 mountaineer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133286
Printed Date: May 05, 2024 at 12:08 PM
Topic: avital 5103 in 97 mountaineer
Posted By: wesalexleft
Subject: avital 5103 in 97 mountaineer
Date Posted: January 12, 2013 at 10:23 PM
I've gotten everything to work but one little thing, and it's driving me crazy. I'm installing an Avital 5103 into a 97 Mounty with NO PATS. With the factory fob, if I'm outside the truck with all doors closed and press the factory lock button, the "theft" light comes on and the factory anti-theft is activated. If I'm outside the truck with the Avital remote and all doors closed, and press the Avital lock button, the doors lock, the Avital arms, but no factory anti-theft. So here's the strange part. If I leave the driver's door open, press the Avital lock on the fob, it locks the doors, sets the Avital AND the factory anti-theft. I want the factory anti-theft to set with all doors closed as well, but I can't find any listing for a factory arm wire to tap. Anyone with experience who could point me in the right direction??
Replies:
Posted By: jstruckman
Date Posted: January 12, 2013 at 11:13 PM
According to Ready Remote, the vehicle will only arm when you lock and the door is opened. so just pulse the door pin while locking and it should arm the alarm.
-------------
|