how can i make arm/disarm chirp quiet?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133296
Printed Date: April 27, 2024 at 9:14 PM
Topic: how can i make arm/disarm chirp quiet?
Posted By: cz eddie
Subject: how can i make arm/disarm chirp quiet?
Date Posted: January 13, 2013 at 8:49 PM
Just installed a Python 574 which is similar to the Viper 5704 I think.
The default chirp is "soft chirp" but even that is too loud for me.
I want something with a much softer chirp.
The full alarm can be as loud as it wants. Same with the warning chirps.
Is there anything I can do? I looked through the manual but didn't see any obvious suggestions.
Replies:
Posted By: tommy...
Date Posted: January 14, 2013 at 10:53 AM
The 5704 has Silent Arm and Dis-arm... Other than that... Nothing in the Programming ...(Soft chirp, of-course)...
------------- M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: shortcircuit161
Date Posted: January 14, 2013 at 11:06 AM
x2 with Tommy,
Only ability to disable chirps altogether but nothing about making them "softer".
-------------
Posted By: cz eddie
Date Posted: January 14, 2013 at 12:39 PM
Thanks, guys. That's too bad.
I think I'll consider making the chirps silent on a permanent basis. I didn't see any info on how to do that (other than one-time silent) but I'll google around..
Posted By: lucasoil4u
Date Posted: January 17, 2013 at 9:27 AM
You could try stuffing a rag in the siren. That might quiet it down enough for you.
|