viper 5704 led indicator problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133332
Printed Date: May 12, 2025 at 2:23 PM
Topic: viper 5704 led indicator problem
Posted By: bobfist
Subject: viper 5704 led indicator problem
Date Posted: January 17, 2013 at 3:08 PM
Hi!
Just installed the Viper 5704 alarm in my tahoe 97
The problem i have is that the led indicator on the antenna blinks two times then three times when the alarm is disarmed, what can couse this?
The led blinks normal when the car is armed.
-------------
Bobfist
Replies:
Posted By: tommy...
Date Posted: January 17, 2013 at 3:37 PM
It is letting you know the alarm was set off... should reset when you cycle the key in the Ignition On/Off...
-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!
Posted By: bobfist
Date Posted: January 17, 2013 at 4:54 PM
Hi!
THanks for the fast answer!
The thing is that i havent plugged in the remote start harness.
Someone wrote online that the pink wire there had to be connected to tell the unit that the ignition is on?
The system are only coneccted to the constant 12v now.
Can this be the problem
-------------
Bobfist
|