Print Page | Close Window

2012 honda crv remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133357
Printed Date: May 06, 2024 at 9:09 AM


Topic: 2012 honda crv remote start

Posted By: audiophyle_247
Subject: 2012 honda crv remote start
Date Posted: January 19, 2013 at 6:05 PM

I am trying to install a Python 4203P remote starter system into a 2012 Honda CRV, which has gone fine until testing. I used a PKALL for immobilizer bypass.

How can I get the OEM alarm to disarm before remote starting?
Sounds like a pretty brainless task, except everything Ive found says the OEM disarm is handled by the keyfob only.

I am thinking the DBALL is the only option, am I correct? Or am I missing something?

-------------
Unless it raises the hair on the back of your neck, its only noise!



Replies:

Posted By: prdjr165
Date Posted: January 19, 2013 at 6:26 PM
looks like the PK-ALL doesn't do disarm.

Factory Alarm Disarm      brown (key unlock) (use relay for higher current)      double -      driver kick, door harness, 18 pin plug, pin 13


Print Page | Close Window