Print Page | Close Window

2003 silverado, dball, viper 5904

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133368
Printed Date: May 15, 2025 at 5:28 PM


Topic: 2003 silverado, dball, viper 5904

Posted By: bobby speer
Subject: 2003 silverado, dball, viper 5904
Date Posted: January 20, 2013 at 12:07 PM

In wiring w2w, not connecting dball d2d harness to 5904, are the +12v and -12v ground wires from DBALL d2d harness (4 pin white) supposed to to be peeled off and connected to +12 v constant and ground in addition to the DBALL 14 pin blue harness's +12v red and -12v black wires?



Replies:

Posted By: kreg357
Date Posted: January 20, 2013 at 1:40 PM
No.  Leave the D2D connector open and apply power and ground at  DB-ALL 14 Pin Plug only.

-------------
Soldering is fun!



Posted By: bobby speer
Date Posted: January 20, 2013 at 5:23 PM
Thank you, kreg357, for all of your help.


Print Page | Close Window