Print Page | Close Window

dei 530t, gwa relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133424
Printed Date: April 25, 2024 at 9:38 AM


Topic: dei 530t, gwa relay

Posted By: drewy1322
Subject: dei 530t, gwa relay
Date Posted: January 25, 2013 at 2:46 PM

I am going to be putting two DEI 530T modules in my vehicle. Currently I do not have anything hooked up to the GWA (orange) wire off my remote start. If I add two 530T modules, do I need to boost the (-)500ma output to a stronger ground using a relay?



Replies:

Posted By: offroadzj
Date Posted: January 25, 2013 at 3:26 PM
You shouldn't need to since it is only driving relays. But to be safe, I would try to see what each 530T will draw and make sure it's not over 500mA

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205



Posted By: t&t tech
Date Posted: January 25, 2013 at 8:13 PM
technically u shouldn't, boosting the gwa wire will leave a relay active with the car off, just diode and u should be fine.


Print Page | Close Window