viper smartstart on ultrastart?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133470
Printed Date: April 19, 2024 at 12:02 AM
Topic: viper smartstart on ultrastart?
Posted By: offroadzj
Subject: viper smartstart on ultrastart?
Date Posted: January 30, 2013 at 11:00 AM
I have a customer interested in a Viper SmartStart and he was told that it would work with his UltraStart remote starter... but everything I can find says that it is only compatible with DEI systems...
Any insight?
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Replies:
Posted By: howie ll
Date Posted: January 30, 2013 at 1:32 PM
Contact UltraStart?
It depends on the connection data protocols, maybe you should ask Fortin or Idatalink!
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: dasbogie
Date Posted: January 30, 2013 at 1:41 PM
You need to find the module with analog outputs. It has provisions to connect to the activation input on any remote start as well as door locks and 1 aux I believe
-------------
Advanced
Posted By: offroadzj
Date Posted: January 30, 2013 at 1:42 PM
I know the Compustar Drone has the analog outputs but I can't find anything for the Viper.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: dasbogie
Date Posted: January 30, 2013 at 1:46 PM
Hit up crutchfield and search dsm250, click on details then scroll down half way down the page it says on the right"what's in the box". Click the link to the manual. Page down and you'll see it has analog outputs. I installer beware it has a note that the analog outs have to be enabled In the installation portal
-------------
Advanced
Posted By: lucasoil4u
Date Posted: January 31, 2013 at 10:08 AM
Call directed tech support and see if it will work . they will give you best answer.
Posted By: vane0804
Date Posted: December 10, 2014 at 7:36 PM
did anybody find the answer to this question? Is SmartStart able to be installed on any system (using the 5-pin cable)?
-------------
~It's me!
Posted By: tedmond
Date Posted: December 10, 2014 at 9:43 PM
hey kenny, i tried sending you a PM, but your inbox is full.
Congratulations on the business!
The VSM200 and VSM250 both have a 5pin harness for analogue connections. Make all hardwired connections to the ultrastart and hopefully the bypass is in w2w so you can just send signals to it.
when you activate the smart start, you will then specify during setup online that its for analogue and not data. You have to activate it through directechs, or it wont work.
1) login to directechs.com
2) under resources go to smartstart activation
3) use the password and login provided and activate
4) use their online tester to make sure the vehicle has a good gps signal lock.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|