clifford 590.2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133483
Printed Date: May 11, 2025 at 7:49 AM

Topic: clifford 590.2

Posted By: adrianotech
Subject: clifford 590.2
Date Posted: February 01, 2013 at 8:09 PM

ANYONE KNOW HOW TO CONNECT H3 HARNESS OF CLIFFORD 590.2 ON HONDA ELEMENT 2003

-------------
ADRIANTECH

Replies:

Posted By: howie ll
Date Posted: February 02, 2013 at 1:00 AM

Define your question
Where to connect it?
What colours?
How to test?
How to solder the joints?
This is all a bit vague.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: howie ll
Date Posted: February 02, 2013 at 2:12 AM

Here's one method:-honda_element.bmp
or this version:-611_honda_element.bmp

Either will work, note most readily available relay is a 5 pin 87a, you can use that, just don't use terminal 87a.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: smokeman1
Date Posted: February 02, 2013 at 7:51 AM

H3/2, 6, 9, and H1/2 to White 12 volt constant....H3/4 to car side of cut BLACK/ White starter wire, H3/5 to switch side of cut BLACK/ White.... H3/1 to BLACK / YELLOW...H3/3 to BLACK/ Red...

H3/7 to WHITE/ Red,( H3/7 need to be set as ACC2 in the brain of the clifford unit, Default is Ignition 2. Can be changed in Menu 3, Item 8, Option 2)

Test and verify the wires with a Digital Multi Meter BEFORE making your connections. Solder and tape connections. Do Not use T-Taps or scotch locks connectors.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: adrianotech
Date Posted: February 02, 2013 at 9:19 AM

thanks guys..

-------------
ADRIANTECH

Posted By: adrianotech
Date Posted: February 02, 2013 at 9:44 AM

i got it , thanks

-------------
ADRIANTECH