dei 516l need

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133504
Printed Date: May 15, 2025 at 2:13 AM

Topic: dei 516l need

Posted By: hondaek
Subject: dei 516l need
Date Posted: February 03, 2013 at 1:03 AM

i just recently installed a new Viper 350 responder 2way alarm. and just purchased the the DEI 516L voice module. everything looks easy to wire up.

just wondering on the wires
H1/6 Blue/White
H1/7 RED / White
H1/8 BLACK/ White

where do these connect to? i know you can record a custom message. which i want to do for custom arm, and disarm messages. im just completely lost in to how to do that. any help would be greatly appreciated.

Replies:

Posted By: howie ll
Date Posted: February 03, 2013 at 3:16 AM

Look;-ign_mirror_fold.bmp
and here's another I found:-
5Z7_mirrors.bmp
You will need two timed aux outputs for the second, I don't thin k the 350 is sophisticated enough for it.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: hondaek
Date Posted: March 01, 2013 at 3:32 AM

thanks again howie!

well i found out that the DEI 516L does not let you over record "VIPER ARM" OR the prerecorded messages. So i ditched it, and was very lucky to score a Scytek true Mp3 siren.

which is soooo much better!!

Print Page | Close Window