compustar nss
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133555
Printed Date: May 10, 2025 at 9:35 AM
Topic: compustar nss
Posted By: offroadzj
Subject: compustar nss
Date Posted: February 08, 2013 at 5:38 PM
Anyone know if there is a 'hidden' neutral safety switch input on the Compustar 6000's? I am looking to change my buddy's r/s / alarm from requiring reservation mode to using the factory NSS (2012 Subaru WRX) for a little extra safety and convenience. I know that on my Subaru it was ground when in gear so I was able to connect that to the hood pin, but I need something for if it is ground in neutral.
I was thinking about re-wiring the clutch bypass relay to use the + starter output of the r/s along with the - nss so that if it was not in gear, the clutch wouldn't bypass; but I'm hoping there is a better way.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Replies:
Posted By: howie ll
Date Posted: February 09, 2013 at 2:51 AM
If it's ground on neutral Kenny, connect the Comp NSS wire directly to that wire, you can then set it up as an auto.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: February 09, 2013 at 3:06 AM
Can't seem to open my 6000 install guide as an adobe file, could you email me one please.
Alternatives are:-
1) Hood pin input.
2) E/park/hand/brake input.
Diode together with either.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|