2007 audi a4 quattro dball door unlock
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133556
Printed Date: May 14, 2024 at 3:25 AM
Topic: 2007 audi a4 quattro dball door unlock
Posted By: shadowinfector
Subject: 2007 audi a4 quattro dball door unlock
Date Posted: February 08, 2013 at 6:19 PM
Just finishing up an install on an Audi A4 2007 , Viper 5301 and DBALL Flashed with 401.VWAUDI 2.03.04....everything is working fine except the Viper unit does not Unlock the vehicle and only locks. The DBall is connected D2D, I also tried doing the unlock and lock wires W2W, but still nothing, changed settings to double pulse and same thing.....just wondering if anybody else has ran into this issue. Trying not to go into the doors to get the door unlock wires. Any help would be greatly appreciated. Thanks !
Replies:
Posted By: lucasoil4u
Date Posted: February 22, 2013 at 10:38 AM
You have to do it all W2W or all D2D not half and half. DBALLS Suck! I will never use them. I use what works Idatalink.
Posted By: howie ll
Date Posted: February 22, 2013 at 12:30 PM
Redo it as W2W, unfortunately go directly into the driver door module for lock and unlock, extend the lock time (comfort close) for window roof (when applicable) closing.
Even with W2W going back to 04, you can't unlock unless you go into the door.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: shadowinfector
Date Posted: April 03, 2013 at 7:02 PM
thanks, ill just use the key to unlock when i remote start lol, too lazy to go back into it.
Posted By: howie ll
Date Posted: April 07, 2013 at 1:37 AM
See my post on the 09 A3, this worked perfectly originally. I think DEI are having an on going software problem with the DB-ALL and VAG cars.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: shadowinfector
Date Posted: April 19, 2013 at 10:26 PM
howie thanks for the reply....mine actually did work the first ffew times also with the unlock, but just suddenly stopped after a few tries....did the same thing u did with changing out the dball and reflashing, but same issue....havent swapped the brain out yet though....will try that next if i can get a hold of one. thanks man
Posted By: howie ll
Date Posted: April 20, 2013 at 12:04 AM
What really worries me is that about the time we came across this problem, they removed the install info from the Xpresskit site!
Hmm, is there something DEI aren't telling us?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: shadowinfector
Date Posted: April 20, 2013 at 12:19 PM
i still see it when i search it...am i missing something?
Posted By: howie ll
Date Posted: April 20, 2013 at 2:16 PM
Sorry, it's me, they've deleted it from the European section.
We still can't use the IM wires but have to use the 556.
There are still lots of CAN differences on seemingly the same vehicle, either side of the pond.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: johnny t
Date Posted: April 26, 2013 at 8:11 AM
Yes, many inconsistencies. I stumped their tech staff on the C6 A6 I did back in December. They definitely have bugs in the firmware. I will not use another DBall if I can help it.
-------------
Don't be a lemming...
Posted By: howie ll
Date Posted: April 26, 2013 at 11:21 AM
X 2 all sorts of inconsistencies with European cars, damn it they've had a development centre in Romania for the last 3 years, have they achieved nothing?
Ditto Fortin in Russia, still problems.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|