2009 corolla
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133563
Printed Date: June 07, 2024 at 11:14 PM
Topic: 2009 corolla
Posted By: ajan246
Subject: 2009 corolla
Date Posted: February 10, 2013 at 1:03 AM
Hey Guys,
Used to be an installer way back. However it's been awhile. Just got married and the wife's car is a bare bones corolla 09 but no power anything. I'm adding a keyless/remote start (bulldog 1200). It looks like the 09 corolla (made in japan) has all the factory wiring for power locks just no actuators. I'm doing after market actuators and i'm wondering can I just tap right into the factory wiring in the molex connectors at the back doors and then make the splice for the keyless up front? Or should I just run wire from all the doors back up to the kick panel. Also, I want to do a trunk pop release anyone ever do one with these glow in the dark corolla handles? Seems simple would love to see a tutorial though.Let me know!
Thanks in advance!
ajan246
Replies:
Posted By: howie ll
Date Posted: February 11, 2013 at 9:11 AM
If the factory wiring is there, by all means use it.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|