Print Page | Close Window

clifford g4 cyber2 pinout

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133587
Printed Date: May 08, 2025 at 5:05 AM


Topic: clifford g4 cyber2 pinout

Posted By: avz3
Subject: clifford g4 cyber2 pinout
Date Posted: February 13, 2013 at 1:45 PM

Hi to all
This is my first post here and I hope that I dont "step on any mines"
any how my question is if any of you can tell me where I can find the wiring diagram/pinout of the 20pin connector on the Clifford G4 cyber2 alarm. I have it installed and I want to dismantle it from the vehicle, so I guess that I have to reconnect some of the wires so that I'll be able to start the motor afterwards.
btw - there is on the site installation guide for the G4 solaris but it a different model.
btw2 - I've approached Clifford's site but I was not able to make any contact with them. not even be able to send them an Email. odd!
hope that you'll be able to help.



Replies:

Posted By: howie ll
Date Posted: February 13, 2013 at 3:01 PM
Strange but the contents say 24 pin and the actual diagram page lists it as a 20 pin.

1     Grey (+) or (-0     Door trigger input
2     White (-)     Valet switch input
3     Orange (-)     Sensor trigger zone 1
4     Grey / YELLOW (-)     Trunk and hood
5     Blue (-)     Sensor input warn (outer zone)
6     Violet (+)     LED output
7     WHITE/ Brown (+)     Ignition input
8     Black (-)     Ground input for sensors, valet switch, LED
9     Black (-)     Unit ground
10     Red (+)     Power for external sensors
11     BROWN / white (-)     Dome (interior) light supervision
12     Grey/Green (+) or (-)     Door lock output
13     Grey/Orange (+) or (-)     Door unlock output
14     Green (-)     Armed output GWA
15     Grey/Violet (-)     Aux output
16     Yellow (-)     Siren output
17     Brown     Parking/Indicator output
18     Brown     Parking/Indicator output
19     RED / White (+)     12 Volt input 20 amp fuse
20     Red     12 Volt input 5 amp fuse

I've downloaded the installation guide so please feel free to email me for it, see my profile.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.





Print Page | Close Window