xpresskit pkall programming issues
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133601
Printed Date: May 10, 2025 at 9:28 AM
Topic: xpresskit pkall programming issues
Posted By: garrettc88
Subject: xpresskit pkall programming issues
Date Posted: February 15, 2013 at 11:17 AM
ok so i have done a few security/auto start systems in the past but this set up has really been giving me some issues. i have a viper 5204 security/ remote start in my 2001 honda accord the security system works fine and i am installing the xpresskit pkall and the 530t window automation system now... the problem i am having is.... i have all the connections made to the immobilizer on the car and the D2D port connected to the viper but i cant get threw programming. i get to step 7 and instead of just flashing once for the honda/acura selection it flashes continually and when i turn the key on i just get a solid light no flash 10 times. any info anyone can give me on this issue will be GREATLY appreciated....
Replies:
Posted By: garrettc88
Date Posted: February 15, 2013 at 11:18 AM
2001 honda civic********
Posted By: Chris Luongo
Date Posted: February 16, 2013 at 8:53 AM
I would test the ignition wire on the module. The flashing starts when the key gets turned on....so maybe the yellow wire isn't getting ignition power.
Posted By: garrettc88
Date Posted: February 16, 2013 at 12:18 PM
i actually had the data wire and the ground while running wires mixed up... blue/white and dark blue/white. should have looked closer the first time...
|