Print Page | Close Window

2nd ignition wire question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13368
Printed Date: May 29, 2024 at 3:33 AM


Topic: 2nd ignition wire question

Posted By: stalt
Subject: 2nd ignition wire question
Date Posted: May 10, 2003 at 9:56 AM

Hey there,

Newbie again.

on my 99 Toyota Camry, it says there is iginition 1 and ignition 2.  Now the alarm, starter combo I bought has outputs for both ignition 1 and 2.  I do not need to use a relay in this situation correct?  I can just hook up the wire directly?

Thanks,

Stalt



-------------
Stalt



Replies:

Posted By: Velocity Motors
Date Posted: May 10, 2003 at 10:28 AM
Depends on the output of the 2nd IGN wire. If it's only a (-) trigger , then you need to hook up a relay like this diagram. If the 2 nd IGN is a (+) output, then hook the wire straight up to the 2nd IGN wire of the car.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: Accordguy
Date Posted: May 11, 2003 at 11:59 PM
hey Velocity could you look at the diagram of a 94 accord and see if I need to hook up a relay to my remote start? Thanks....


Print Page | Close Window