Print Page | Close Window

esp 500

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133794
Printed Date: May 15, 2024 at 4:49 PM


Topic: esp 500

Posted By: cosworth1
Subject: esp 500
Date Posted: March 07, 2013 at 7:20 AM

hallo everybody its Con ,i m new to the forum which is full of usufull info.well i ve got this car alarm installedin my car it worked fine but car battery run out cause i didnt move it for about six months. i ve found all the harnes (;),main box ,triger with magnet inside ,and the box with the sensitivity switch.the red leds flash in both boxes .my vallet swith is not there. one cable is connected to wires going in the drivers door and the other just with tape. i ve put a switch to these two and nothing happent.my 4 button remote is with new bat. but the alarm is not working.could anyone tell me what i m missing?thanks in advance.



Replies:

Posted By: cosworth1
Date Posted: March 07, 2013 at 7:21 AM
its ford saphire/sierra cosworth 2wd ,thanks.




Posted By: howie ll
Date Posted: March 07, 2013 at 8:21 AM
Sounds like the remote isn't working.
If it's as old as the car it's a bin job, the car is about 15 years old.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.





Print Page | Close Window