viper 5704 wont show temp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133845
Printed Date: July 07, 2025 at 5:08 PM

Topic: viper 5704 wont show temp

Posted By: starkyb
Subject: viper 5704 wont show temp
Date Posted: March 12, 2013 at 5:58 PM

I installed a viper 5704 on my Ford F150 but cant get the remote to show the temperature on the remote. I went into the menu and selected the remote to show during remote start but I still have no temp display. is there something else I need to do?

Replies:

Posted By: smokeman1
Date Posted: March 12, 2013 at 7:10 PM

If you press the F button once, and then press and hold the F button, do you get a temp report?

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: starkyb
Date Posted: March 13, 2013 at 9:27 AM

Yes. Is there a way to make it show up automatically?

Posted By: smokeman1
Date Posted: March 13, 2013 at 10:08 AM

Remote needs to be setup for the Remote Start Info to display the temp. Page 25 of the Owners Manual.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: starkyb
Date Posted: March 13, 2013 at 11:04 AM

I went through the steps to make it show but it still wont display. I will try it again. Thanks for responding.

Print Page | Close Window