Print Page | Close Window

want both 506t and 508d clifford 330.3x

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133852
Printed Date: July 05, 2025 at 4:53 PM


Topic: want both 506t and 508d clifford 330.3x

Posted By: beech2000
Subject: want both 506t and 508d clifford 330.3x
Date Posted: March 13, 2013 at 8:41 PM

Whats the best way to wire in both the DEI 506T Glass Break Sensor and a DEI 508D motion sensor? Brain is 330.3x Clifford and both sensors have the same plugs.



Replies:

Posted By: howie ll
Date Posted: March 14, 2013 at 1:28 AM
Like this:-EZ9_multiple_sensors.bmp

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.



Posted By: beech2000
Date Posted: March 14, 2013 at 10:33 AM
OK Parallel. Thanks




Print Page | Close Window