2013 optima pts; cm6200 w/ bladeal
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133864
Printed Date: May 07, 2024 at 11:58 PM
Topic: 2013 optima pts; cm6200 w/ bladeal
Posted By: offroadzj
Subject: 2013 optima pts; cm6200 w/ bladeal
Date Posted: March 15, 2013 at 11:17 AM
Quick and easy one for you guys. I installed a Compustar 6200 remote start with Blade AL bypass into a 2013 Kia Optima PTS a couple weeks ago and just got a call from the customer that the factory remote is remote starting the car whenever he presses the lock button. I can't remember if there was a OEM remote start configuration or not and if it could be turned off in the module options.
I'm also a little confused because from what I understand, the customer is only pressing the lock button once and it is activating the remote start... usually the OEM remote provisions are set to pressing the lock button 3 times.
Anyone have any ideas or had the same issue?
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Replies:
Posted By: shortcircuit161
Date Posted: March 15, 2013 at 2:00 PM
Check the advanced features of the Blade. Looks like that firmware has RS Control from OEM remotes. It might be active for one lock press. You can either change it to 3 presses or disable it altogether.
-------------
Posted By: offroadzj
Date Posted: March 15, 2013 at 2:17 PM
I was pretty sure it did have an option to change it but I wanted to make sure before I had the customer come back. Didn't want to end up having him waste a trip.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
|