09 camry remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133879
Printed Date: May 15, 2025 at 12:27 PM
Topic: 09 camry remote start
Posted By: wyciwug
Subject: 09 camry remote start
Date Posted: March 17, 2013 at 11:32 AM
I have a clifford alarm/remote start combo 3.3x. Lately, the remote start is giving me problem
I pressed remote start button to start the car. The light will come on and look like it's about to start, all the lights in the dash come on, heater run, radio is on, parking light is on but it won't crank. It will not try to restart again. I also tried to start the car with the key in the ignition, it does the same thing and won't start. It only works when I started the car with the key, then press the remote start button, all lights will flash one, take the keys out. The car will continue to run.
Another thing i did was removed the main fuse to the brain of the combo, put it back. Then the system works again? It only last for a day or two, sometimes a few weeks. I checked the shutdown diagnosic, the Valet light will flash 5 twice, then flash 4 one time.
Can anyone tell me what could be the problem? Do I need to reprogram the XK05? Thanks
-------------
DCD
Replies:
Posted By: offroadzj
Date Posted: March 17, 2013 at 12:09 PM
How is the unit grounded?
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: wyciwug
Date Posted: March 18, 2013 at 1:53 PM
Grounded to car's others ground cable at the existing bolt at the driver kick.
-------------
DCD
Posted By: offroadzj
Date Posted: March 18, 2013 at 2:23 PM
It is better to use a ring terminal at the factory bolt, but as long as the factory ground wire is large enough it should be ok. Try holding the key to the ignition cylinder and try to remote start it. You can put the key into the ignition but don't turn it. Do you have a tach connection wired?
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
|