emissions test failed cause of remtoe sta
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133907
Printed Date: May 12, 2025 at 8:31 PM
Topic: emissions test failed cause of remtoe sta
Posted By: jpadj22
Subject: emissions test failed cause of remtoe sta
Date Posted: March 22, 2013 at 10:31 AM
I did a r/s awhile ago on my friends nissan 07 sentra. They had the emissions test and they told him it failed because of the remote start. I used an idatalink ads bypass module and i did have to tap in to the obd plug for the CAN H and CAN L. The only thing I can think of is to cut the wires and try and pass the test, then splice them back once the test is done.Has anyone been threw this before? Does anyone know if my solution will work? Whats the reason for it failing? Any suggestions would be great thanks.
-------------
No better feeling then getting a remote start to work right!
Replies:
Posted By: howie ll
Date Posted: March 22, 2013 at 12:52 PM
Or get an inductive pick-up for the Hi-Lo.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jpadj22
Date Posted: March 22, 2013 at 1:56 PM
Thanks for the reply. Im not familiar with inductive pick up for hi-lo. How is that wierd up?
-------------
No better feeling then getting a remote start to work right!
Posted By: howie ll
Date Posted: March 22, 2013 at 2:04 PM
Not "wierd" at all, quite straightforward. we use them over here with trackers exactly to avoid your problem.
Google Sailes-Marketing or "inductive OBD CAN pick-up".
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: jpadj22
Date Posted: March 22, 2013 at 2:44 PM
Ok thanks ill do some research. Just in case this happens to some one eles, taking those wires off the obd will work to pass the emissions test. I already soldered them back together everything is working fine.
-------------
No better feeling then getting a remote start to work right!
Posted By: howie ll
Date Posted: March 22, 2013 at 2:50 PM
You would probably have got away with pulling the idatalink module's fuse.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|