fortin evo all programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133923
Printed Date: May 15, 2024 at 9:59 AM

Topic: fortin evo all programming

Posted By: marc22
Subject: fortin evo all programming
Date Posted: March 25, 2013 at 7:54 AM

I'm installing an Evo-All and when I hold the programming button and plug in the 4 pin data wire(only red and black are being used) the light sequence is blue, red, yellow, BLUE & RED TOGETHER, rather than the blue, yellow, red that is should be. I've contacted Fortin about it, just waiting for a response, but figured I'd see if anyone here has seen that before.

-------------
Just barely smart enough to make it broken.

Replies:

Posted By: marc22
Date Posted: March 25, 2013 at 8:57 AM

Fortin says it is for Ford vehicles and it is normal.

Move along people. Nothing to see here.

-------------
Just barely smart enough to make it broken.

Print Page | Close Window