viper 7504 tarp trigger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134068
Printed Date: April 28, 2024 at 8:18 PM
Topic: viper 7504 tarp trigger
Posted By: hillbille2
Subject: viper 7504 tarp trigger
Date Posted: April 19, 2013 at 12:54 AM
Hello,I have a F250 2001 and installed a viper 7504 alarm. What i need is for a trigger set up so when the tarp cover is removed at any rear corner the alarm will trigger, I have tried using the trunk -trigger and a couple of reed switches and magnets glued to tarp, but it wont trigger if both are not done as one is still earthed and one not. I tried diodes to isolate them with no affect. Any ideas, Sorry about spelling I'm an Aussy.
-------------
Hillbilly
Replies:
Posted By: 91stt
Date Posted: April 19, 2013 at 11:08 AM
How are you wiring the reed switches? I don't have a manual for the 7504 but what input are you using for trigger?
-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
Posted By: howie ll
Date Posted: April 19, 2013 at 11:23 AM
Check your wiring, diode separated with the band to the switch, wire to the blue wire at H2/19 either grounding should trigger the alarm.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tonanzith
Date Posted: April 19, 2013 at 12:18 PM
N.c. Mag/reed switches will work for this. It sounds like your using n.o. Mag/reed switches.
-------------
Gary Sather
Posted By: hillbille2
Date Posted: April 19, 2013 at 8:13 PM
Hello, I have n/o reed switches wired to ground and using the trunk pin H2/19 as a trigger.The diodes used were in5404 and tried both ways.I have a bit writer and have changed to n/o and n/c to test
-------------
Hillbilly
|