Print Page | Close Window

1999 jeep grand cherokee interface module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134150
Printed Date: May 12, 2024 at 1:26 PM


Topic: 1999 jeep grand cherokee interface module

Posted By: Lubrano
Subject: 1999 jeep grand cherokee interface module
Date Posted: May 02, 2013 at 6:03 PM

I am looking for a Immobilizer Override and Databus Interface module for a 1999 jeep grand cherokee. I don't own any programmers. Can someone direct me to one which has the firmware pre-loaded from the manufacture. Thank you.



Replies:

Posted By: kreg357
Date Posted: May 02, 2013 at 6:55 PM

The best choice is the iDatalink ADS AL CA flashed with the ADS-AL(DL)-CH6 firmware.
I have used this module with excellent results.  The door locks and Factory Alarm are a
PITA and this bypass module handles that well.  While it is a registered dealer only flash,
there are several online stores that will flash the module for you prior to shipment.  Here is
a link to the install guide :
https://cdncontent2.idatalink.com/corporate/Content/Manuals/DL-CH6/ADS-AL(DL)-CH6_20110829.pdf

The other option is the Fortin INT-SL+ bypass module.  It comes pre-loaded and all
ready to go right out of the box.  I have not used this module on a Jeep but have on
other vehicles with excellent results.  Here is a link to the install guide : 
https://ifar.ca/download/3966/preview.html

There are modules from XPressKit ( Directed ) but most require a flash procedure prior
to install.  Same goes for the newer Fortin EVO-ALL's because they dropped support for J1850
data after Firmware Rev 4.06.



-------------
Soldering is fun!


Print Page | Close Window