95 jeep cherokee keyless entry install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13419
Printed Date: August 05, 2025 at 1:56 PM
Topic: 95 jeep cherokee keyless entry install
Posted By: grimesm
Subject: 95 jeep cherokee keyless entry install
Date Posted: May 11, 2003 at 10:01 AM
I'm trying to install a alpine SEC-8028 alarm in my jeep, I have gotten the alarm itself woking but am havin issues with the keyless entry. I can quite figure out the wireing to the factory relays.
There is a green wire that is going from 87a on the unlock relay to 87a on the lock relay, also each relay has 2 grounds but they are all tied together across both realys. And the unlock relay has a pink/purple
which I think is a positive lead but not really sure, the lock also has a ORANGE / purple wire which is also a positve. then each relay also has another wire which i cant remember the colors for.
Does anyone have any idea what to connect what to for this alarm. Any help would be greatly appreciated.
Replies:
Posted By: grimesm
Date Posted: May 11, 2003 at 8:43 PM
well i got the keyless entry on the alarm to work via the alarm remote, but a new problem has poped up. If the locks are pluged into the alarm the door switch will not work, it does not even trip the relay but the dome lights will dimm and or blow the fuse to the dome lights(which are not supposed to be on the same fuse as the locks). If i unplug the locks from the alarm module the lock swiches will function again normally. Any ideas how to fix this??
|