2006 durango factory disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134218
Printed Date: April 23, 2024 at 9:28 PM

Topic: 2006 durango factory disarm

Posted By: alexherb
Subject: 2006 durango factory disarm
Date Posted: May 15, 2013 at 1:40 PM

My wiring info says with Ign powered and keysense grounded it should disable, and it sort of does but it honks the horn 4 times before it shuts off. Anyone had this issue or found a fix for it?

Replies:

Posted By: cpalmer
Date Posted: May 15, 2013 at 7:31 PM

you also need to be giving it the sentry key signal as well

Posted By: alexherb
Date Posted: May 16, 2013 at 10:44 AM

by sentry key im guessing that means the transponder signal, im using an FLCAN, wouldnt that give the signal its looking for?

Posted By: dasbogie
Date Posted: May 16, 2013 at 5:15 PM

between the durango and dakota of that platform usually just set up the flcan to unlock before start and relock after start and your golden.

-------------
Advanced

Posted By: cpalmer
Date Posted: May 16, 2013 at 8:36 PM

What unit are you using with the FLCAN? What firmware are you using?

Print Page | Close Window