w/viper 3203 to 01 honda accord lx

Can anyone give me the exact information for the whole alarm? After my dad successfully got the keyless entry to work, we were at lost for the rest. Like which wire goes to which color wire on my car. And ones we didn't need to use. It's confusing when looking at the alarms reference chart, and then the cars reference chart because everything is listed, some wires are on the passenger side fuse box. But I know you could hook everything up from the driver side wires. Also, my trunk is mechanical release, where I have to lift the tab thing to open it. Am I able to do a trunk release for that? I would greatly appreciate it if you can, thanks so much for your help!!!!

So far I have


H2/1 VIOLET UNLOCK (INPUT)       Chassis Ground
H2/2 BLUE/BLACK UNLOCK (OUTPUT        2001 Honda Accord LX GREEN/ Red wire in Gray 2 Pin connector
H2/3 BROWN / BLACK UNLOCK #87a Not Used
H2/4 VIOLET/BLACK* LOCK (INPUT)  Chassis Ground
H2/5 GREEN/ BLACK LOCK (OUTPUT)        2001 Honda Accord LX BLACK/ White wire in Gray 2 Pin connector
H2/6 WHITE/ BLACK LOCK #87a     Not Used
H2/7 WHITE/ VIOLET FLEX RELAY (INPUT)
H2/8 WHITE/ BROWN FLEX RELAY 87a

Trunk Release      GREEN/ BLUE (-)       AT KEYLESS MODULE (LX),
*** KEYLESS/SECURITY Module attached to the DRIVERS UNDERDASH PANEL
Use this Viper H1/1 RED / WHITE (-) 200mA AUX/TRUNK OUTPUT wire.

     Might need to assist the forum members a wee-bit by filling in this template.  ( I, for one, do not have the Viper 3203 manuals.)

         https://www.the12volt.com/installbay/file.asp?ID=1195

-------------
Soldering is fun!